IS, ASTM, BS & MORTH Compliant Testing for Roads, Bridges, Buildings & Infrastructure
Automated pavement condition survey — roughness, cracking, rutting & PCI data collection.
FWD testing for pavement deflection, modulus back-calculation and overlay design.
Load testing of bridges & ROBs with deflection monitoring and structural safety certification.
UPV, rebound hammer, rebound & core correlation, GPR, half-cell potential & rebar locator.
In-situ bearing capacity and settlement evaluation for foundations and pavement layers.
Air, water, noise & soil quality monitoring with CPCB/SPCB compliant reporting.
Stage-wise safety audits for highways, intersections & urban roads with improvement plan.
Street light and area illumination survey — lux level measurement and uniformity ratio.
BI & IRI measurement using bump integrator and laser profilometer for pavement evaluation.
Static initial & routine vertical load tests on piles with kentledge or reaction frame setup.
PDA / PIT testing for pile integrity, capacity assessment and low-strain defect detection.
Lateral load testing of piles and well foundations with deflection & load curve analysis.
Borehole drilling, SPT, sampling, soil profiling & foundation recommendation reports.
On-site core extraction from concrete members and laboratory compressive strength testing.
Total station / DGPS based survey, levelling, cross-section & quantity estimation.
Speak directly with our senior geotechnical & highway testing engineers.